Panasonic PT-CW330U Operations Manual download pdf (Page 31)

Projecting

ENGLISH -

Basic Operation

Check the connections of the peripheral devices and connection of the power cord (

page 28) and switch on the

power (

page 30) to start the projector. Select the image and adjust the state of the image.

Selecting the input signal

Select an input signal.

Press <INPUT> button on the control panel or the <INPUT>, <COMPUTER>, <HDMI>,

<VIDEO>, <S-VIDEO> on the remote control.

The image of the signal being input in the selected terminal is

projected.

Press <INPUT> button to display the [Source] menu. Press

▲▼ to select the desired input and press ► to enter.

How to adjust the state of the image

Adjust the projection angle.1 )

Place the projector parallel to the screen, and then install it on a at surface so that the screen becomes

rectangle.

If the image is tilted lower than the screen, extend the adjustable feet to make a rectangle screen.

For details, see “Adjusting the Projector's Height” (

page 24).

Adjust the focus.2 )

Turn “Focus Ring” to adjust the image.

Note

It is recommended that the images are projected continuously for at least 30 minutes before the focus is adjusted.

If keystone distortion occurs, see [V Keystone] in the [Position] menu (

page 39).

Projecting

Focus Ring

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 73 74

No comments

Panasonic PT-CW330U Operations Manual Page 31