Panasonic WV-SW458 Installation Guide download pdf (Page 19)

Note:

 • Thedirectionof“gTOP” on the camera attachment (accessory) determines the upwards direc-

tion of the image on the PC monitor.

 • Forceilingmounting:

Determine the direction that you want images to be displayed upwards on the PC monitor, and

then mount the camera attachment with “

TOP” facing this direction.

 • Forwallmounting:

The camera attachment (accessory) shall be mounted with “gTOP” facing upward.

Installing the camera directly on the ceiling or wall

SW458M

Place the installation template label (accessory) on the ceiling or wall, and make a hole to pass the

cable.

Remove the template label, and mount the camera attachment (accessory) by fixing 4 screws

(locally procured).

46 mm {1-13/16 inches}

Arrow

83.5 mm {3-9/32 inches}

Cable access hole

(ø30 mm {ø1-3/16 inches})

Installation template label

(accessory)

Fixing screws (4 pcs., locally procured)

Camera attachment (accessory)

Direction marker for installation

IMPORTANT:

 • Formountingacameraonaconcretesurface,useananchorbolt(M4)oranAYplugbolt(M4)

for installing.

(Recommended tightening torque M4: 1.6 N·m {1.18 lbf·ft})

Note:

 • Thedirectionof“gTOP” on the camera attachment (accessory) determines the upwards direc-

tion of the image on the PC monitor.

Determine the direction that you want images to be displayed upwards on the PC monitor.

When installing, make sure that the direction of the arrow shown on the installation template

label matches that of the direction marker for installation.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

No comments

Panasonic WV-SW458 Installation Guide Page 19