Panasonic PT-CW330U Operations Manual download pdf (Page 62)

Troubleshooting

- ENGLISH

Maintenance

Problem Cause

Reference

page

Messages displays

Dust Filter Reminder Message:

This message displays when the projector reached the timer set in

the [Filter Reminder (Hour)]. In this case, please clean the air lters or

replace them.

Lamp Warning Message:

The lamp has reached its end of life, please replace it as soon as

possible.

Fan Locked Warning Message:

This shows the fan has stopped during projection and the power will be

shut off soon. Unplug the power cord from the outlet and contact your

dealer for details.

Temperature Fail Message :

The internal temperature is too high and the power will be shut off soon,

please conrm the display items.

Attention

Please contact your dealer if the projector still can not be operated normally after following the instructions above.

Note

The <AUTO ADJ.> operation may not optimize the image position or the resolution, depending on the input signal format or

the image contents. In this case, switch to a different image and execute <AUTO ADJ.> again.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 73 74

No comments

Panasonic PT-CW330U Operations Manual Page 62