Panasonic KX-HGW600 User Manual download pdf (Page 106)

Operating Instructions

106

3. When you have finished, click [Save]. The settings will be saved.

4. Click [Restart Now!].

IP Address (LAN)

DHCP

When you use the DHCP server function, the KX-HGW600 can assign an IP address

automatically to each device on the LAN side.

IP Address (LAN) Enter the IP address on the LAN.

(The default setting is "192.168.0.254".)

The IP address must be entered out of the Available Address

Range in the DHCP setting.

Subnet Mask Enter the Subnet Mask on the LAN.

(The default setting is "255.255.255.0".)

Port No. of WWW

Server

Enter the port number of the web server.

(The default setting is "80".)

DHCP Server

This function enables the KX-HGW600 to assign an IP address

automatically to each device on the LAN side. (The default

setting is "Use".) To assign the IP address manually to each

device on the LAN side, check Do Not Use. In this case, the

Automatic Setup function does not work.

Available

Address Range

When you use the DHCP server function, enter the range of the

private IP addresses, 32 to 128 addresses. Change them only

when necessary. The last 16 addresses (default setting:

192.168.0.113-192.168.0.128) of 128 addresses are reserved for

Network Camera. Enter the value greater than "192.168.0.32".

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 151 152

No comments

Panasonic KX-HGW600 User Manual Page 106