Panasonic WV-NP1004 User Manual download pdf (Page 13)

Installations/Connections

Before start the installation/connection, prepare the required devices and cables.

Before starting the connection, turn the power of the devices including the camera and the PC off or disconnect the power

cable from the outlet.

Step 1

Fix an optional camera mounting bracket onto the desired

place and mount the camera on it.

Use appropriate screws for the panel/wall material to

secure an optional camera mounting bracket.

The following are examples of the camera installation using

an optional mounting bracket.

The camera can be mounted on the bracket using the

screw holes for the camera mounting bracket (1/4-20UNC).

Optional camera mounting bracket: WV-831

Optional camera mounting bracket: WV-7010A

Important:

• Make sure that the installing place is strong enough to

support the total weight of the camera and the camera

mounting bracket.

• Install the camera mounting bracket on the foundation

part of the building or equivalent strong part.

• Method of installation may be different depending on

the material of the place where the camera mounting

bracket is to be installed.

When installing on steel: Fix with bolts and nuts

(M6 or M8).

When installing on concrete: Fix with anchor bolts. (M6

or M8)

• Do not use wood screws to fix the camera mounting

bracket (option) since they are not strong enough to

support the weight of the camera and the bracket.

• Refer to "Select Safety Wire Kit." for details on the instal-

lation height of camera mounting bracket.

Step 2

To prevent the camera from dropping that may cause acci-

dental injury, attach a safety wire between the camera and

the wall/panel.

Attach one end of the safety wire to the safety wire holder of

the camera and the other end to a locally procured safety

wire holder to be installed on the foundation part of the

building.

<Example: Installing on the wall>

Installation height

Floor

ACT

VIDEO OUT

10BASE-T/

100BASE-TX

LINK

POWER

SD CARD

GND

AC24V

1-L

2-N

GND

DAY/NIGHT IN

AUX OUT

ALARM OUT

ALARM IN

Safety

wire

Safety wire

holder

Foundation part of the building or

equivalently strong part

Safety wire

Installation height

Floor

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Comments to this Manuals

No comments

Panasonic WV-NP1004 User Manual Page 13

Comments to this Manuals

Related products and manuals for Hardware Panasonic WV-NP1004