Panasonic WV-NP1004 User Manual download pdf (Page 15)

[Connection example]

When connecting with a PC directly

LAN cable (category 5, cross)

When connecting via a network

Switching hub or router

LAN cable (category 5, straight)

Important:

• Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX.

• Power supply is required for each network camera.

• When connecting multiple network cameras, it is necessary to configure the settings of the router in use. It is also neces-

sary to configure port numbers for each network camera independently. Refer to page 21 for further information about the

settings.

Refer to the operating instructions of the router for descriptions of how to configure the router.

LAN cable (category 5, cross)

ACT

VIDEO OUT

10BASE-T/

100BASE-TX

LINK

POWER

SD CARD

GND

AC24V

1-L

2-N

GND

DAY/NIGHT IN

AUX OUT

ALARM OUT

ALARM IN

Note: When connecting to the

video input connector of a

device that has the power

switch for the connected

camera, such as the

Panasonic WV-CM142,

turn the power switch for

the connected camera off.

Connect to the video input connector of a frame

switcher, matrix switcher, etc.

Connect to the video input connector of a digital

disk recorder, time lapse VCR, etc.

PC (Refer to page 7 for the

system requirements for a PC)

Video monitor

System device

Recording device

LAN/Internet

Network device

(Hub, router, ADSL/CATV

modem, etc.)

ACT