Setting the information for scan to FTP server (LAN supported models only) ( )
When you send scanned files to an FTP server, you can register the FTP destinations (up to 6 destinations) to
the unit through the web browser interface.
1. Start Multi-Function Station.
2. [Device] [Configuration Web Page] [Device]
3. Type “root” as the user name, then enter the programming password (feature #155). [OK]
4. Select [SCAN FEATURE] from the menu.
5. Click [Edit] next to [FTP SERVER].
6. Click [Edit] next to the desired FTP server.
7. Enter the server name, IP address, folder path, etc. [Submit]
8. Close the web browser.
Note
• If you do not enter a folder path in step 7, the scanned image will be saved in the root folder.
Setting the information for scan to SMB folder (LAN supported models only) (
)
When you send scanned files to an SMB folder, you can register the SMB folder destinations (up to 6
destinations) to the unit through the web browser interface.
1. Start Multi-Function Station.
2. [Device] [Configuration Web Page] [Device]
3. Type “root” as the user name, then enter the programming password (feature #155). [OK]
4. Select [SCAN FEATURE] from the menu.
5. Click [Edit] next to [SMB FOLDER].
6. Click [Edit] next to the desired SMB folder.
7. Enter the folder name and account information.
8. Click [Browse], and select a desired computer and/or folder directory from the list. [OK]
• You can also enter the folder directory manually.
9. [Submit]
10. Close the web browser.
6.2 Scanning from the unit (Push Scan)
Operating Instructions 83
Comments to this Manuals