Panasonic KX-HGW600 User Manual download pdf (Page 48)

Operating Instructions

2.3.3 Connecting your Network Camera

Setting up your Network Camera automatically

Once you connect your Panasonic Network Cameras (KX-HCM series) to the

KX-HGW600 and turn them on, the network settings such as IP address, port no. are

configured automatically by the Automatic Setup function. After completing the LAN

(Intranet) configuration, make sure the target Network Camera is turned off and follow

the steps below.

1. a) To connect the KX-HGW600 and Network Camera with an Ethernet cable,

connect the Ethernet cable to one of the LAN 1—4 jacks of the KX-HGW600

and the other end to the Ethernet jack of the Network Camera.

Note

All Ethernet jacks have an automatic MDI/MDIX feature, which means either a

"straight" or "cross" cable can be used to connect to any jack. The KX-HGW600

will automatically detect which cable has been inserted.

Ethernet cable

Ethernet jack

b) To connect the KX-HGW600 and Network Camera in the wireless network,

locate the wireless Network Camera near the KX-HGW600.

To modem

To P C

LAN1—4 jacks

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 151 152

No comments

Panasonic KX-HGW600 User Manual Page 48