Panasonic PT-DS8500U Operations Instructions download pdf (Page 47)

Basic operations using the remote control

ENGLISH -

Basic Operation

Automatic adjustment

The automatic setup function can be used to

automatically adjust the resolution, clock phase and

picture position when analog RGB signals consisting

of bitmap images such as computer signals are being

input, or to automatically adjust the picture position

when DVI-D/HDMI signals are being input.

It is recommended to supply images with a bright

white frame at the outermost periphery containing

characters etc. that are clear in white and black

contrast when the system is in automatic adjustment

mode.

Avoid supplying images that involve halftones

or gradation such as photographs and computer

graphics.

button

Press <AUTO SETUP> button on the

remote control or the main unit.

A message [COMPLETE] appears if adjustment is

ended normally.

Note

[CLOCK PHASE] may have been shifted even when the

adjustment ended normally. In this case, manually adjust

the [CLOCK PHASE].

Refer to “CLOCK PHASE” of “POSITION menu”

(

page 60) for details.

If an image with blurred edges or a dark image is input,

[INCOMPLETE] may appear or adjustment may not

be performed properly even if [COMPLETE] appears.

In this case, manually adjust the items of “INPUT

RESOLUTION” of “ADVANCED MENU” (

page 64),

“SHIFT” and “CLOCK PHASE” of “POSITION menu”

(

pages 58, 60).

For specic signals, adjustment should be made

according to “AUTO SETUP” of “DISPLAY OPTION

menu” (

page 71).

[AUTO SETUP] may not be available depending on the

machine type of the personal computer.

Automatic adjustment may not available for

synchronization signal of C-SYNC and G-SYNC.

Image may be distorted for several seconds during

automatic adjustment. This is not a malfunction.

For every supplied signal, adjustment is required.

Automatic adjustment can be canceled by pressing

<MENU> button during the course of automatic

adjustment.

Even for an RGB signal for which automatic setup is

possible, if automatic setup is performed while moving

images are being input, [INCOMPLETE] may appear,

or adjustment may not be performed properly even if

[COMPLETE] appears.

Using the FUNCTION button

[DISABLE], [SUB MEMORY], [SYSTEM SELECTOR],

[SYSTEM DAYLIGHT VIEW], [FREEZE], [P IN P],

or [WAVEFORM MONITOR]

operations can be

assigned to <FUNCTION> button on the remote

control so that it can be used as an easy shortcut

button.

button

Press <FUNCTION> button on the remote

control.

PT-DZ8700U only:

Note

Refer to

“FUNCTION BUTTON” of “PROJECTOR SETUP

menu” (

page 84) for details.

Displaying the internal

test pattern

The projector has 9 types of internal test patterns to

check the condition of the set.

To display test patterns, follow the steps below.

button

Press <TEST PATTERN> button.1 )

Press ◄► to select [TEST PATTERN].2 )

Note

Setting is also possible by using an on-screen menu.

Refer to “TEST PATTERN menu” (

page 88) for details.

Adjustment of the image, picture quality, position, size

and other factors will not be reected in test patterns. Be

sure to display an actual input signal before performing

these adjustments.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 128 129

Comments to this Manuals

No comments

Panasonic PT-DS8500U Operations Instructions Page 47

Comments to this Manuals

Related products and manuals for Data projectors Panasonic PT-DS8500U